User Tools

Site Tools


1u_firmware_log:start

rudy_wiki_header_ripdraw_lite_rev_1.jpg

1U RipDraw Display Firmware Documentation 480x110

This is the current state of the 1U RipDraw firmware. Contact us for to upgrade your 1U RipDraw Display firmware.

DevApp VersionAvailability DateChange Summary RecommendationFirmware Download
0.3.4August 12, 2016Fixed Host USB driver DTS signal issue Update recommended Firmware v0.3.4
0.3.3July 15, 2016White flash at boot issue fixed Update recommended Firmware v0.3.3
0.3.2July 7, 2016Reboot after flashing; flashing ending procedure matches image/font flash
0.3.1July 5, 2016Missing Font bug fixed Update recommended Firmware v0.3.1
0.3.0June 14, 2016Emulator Flashing added Update recommended
0.2.9June 9, 2016480 x 128 support Not Required
0.2.8January 4, 2016480 Pixel addressing fixed Update required
0.2.7November 2, 2015 RdFontRelease bug fixed Update recommended
0.2.6September 7, 2015 Revision Number Update Only Update not required
0.2.5August 3, 2015 RdImageWrite() will return a non-zero imageid. Previously a zero imageid was possible.Minor upgrade
0.2.2May 25, 2015 SPI interface bug fixRequired if using SPI interface
0.1.8April 9, 2015 1U boots to a black screen before putting up splash screen. Previously 1U boots to white screen before splash screen.Minor upgrade
0.1.7March 24, 2015Initial firmware releaseObsolete, upgrade required

DevApp Version is the status displayed by the RipDraw Windows Native Emulator on a GET status.

rudy_wiki_header_ripdraw_lite_bottom_rev_1.jpg

Last modified: 2016/08/12 10:51

Page Tools